SJ9505L-"Modern Vibrant Orange Public Seating Bench with Metallic Frame – Sleek and Ergonomic Design for Public Spaces"

The Philippine Deped Project Products For different regions, like R9, R7, etc. In stock Now! Size:  Elementary table 600mm(L)x400mm(W)x670mm(H), chair 370mm (W)x 380mm (D)x 700mm(H)  Secondary table  600mm(L)x400mm(W)x730mm(H), chair3 70mm (W)x 380mm (D)x 800mm(H)Also offer bamboo student chair and table, and teacher table and chair, all for Deped the Philippine.

Seat: Multi-layer board with fireproof board. Backboard: High-quality density board. Back support frame: 2.5MM hot-rolled plate + 6MM hot-rolled plate. Crossbeam: High-quality aluminum alloy, top crossbeam with pen slot. Writing board: MDF with fireproof board. Tripod: 2MM hot-rolled plate and 6MM hot-rolled plate. Reset function: Damping recovery. Seat cover, crossbeam cover: High-quality environmentally friendly PP. Ground burst screw: expansion nut + screw.

Quality Two-person Apartment Bed Multifunctional Storage Student Apartment Bed Manufacturer |. The company has established a rigorous production management system to strictly control the quality and production costs during the production process. Compared with other similar products, the  produced has more advantages in terms of quality and price, and is more cost-effective.

1. Seat and back plate: all are made of engineering plastics (imported PP material), with high strength, aging resistance and durability. Designed based on ergonomics principles and incorporating the concept of back protection, it ensures fatigue free sitting for extended periods of time.2. Column: 70x30x1.2mm high-quality elliptical steel, rust resistant and durable. The foot specification is 300x80x30mm, made of high-quality cold-rolled steel plate with a thickness of ≥ 2.0mm and formed by stamping and stretching.3. Desktop: 18mm thick medium density fiberboard substrate, surface coated with fireproof board, duckbill edge wrapping, desktop width of 350mm, high bonding strength, beautiful and generous, durable, desktop wear-resistant, scratch resistant, easy to clean.4. Front desk panel: 15mm thick high-quality medium fiber decorative panel, with PVC edges on all four sides.5. Lower shelf: 20x1.2mm square tube bent and welded to round tube to form.6. Rebound and braking mechanism: Adopting a self weight return device, it has the advantages of good return, low failure rate, and durability. The rotary shaft sleeve is made of nylon sleeve, which returns silently. The brake parts are made of 1.5mm cold-rolled steel plate and stamped in one go to form a "concave" shape. The rotating shaft is made of round steel with a diameter of 12mm, and the inner end is machined into a 10mm diameter axis by a lathe, with left and right limit functions; The seat support ear iron is made of hot-rolled steel stamping with a thickness greater than 2mm, with a smooth and beautiful surface that does not require polishing treatment. The rear counterweight pull rod is made of 20x1.2 square tube;7. Welding: CO2 shielded welding is used, with deep solder joints without bottom seams, smooth and even welds, good load-bearing capacity, and strong durability.8. Hardware: All products comply with national standards to ensure secure connections and long service life.9. The surface of the steel parts undergoes multiple degreasing, acid washing, neutralization, surface adjustment, film coating, crystallization, and electrostatic spraying. The surface is smooth and even, with even spraying. There will never be any peeling of the paint surface.

1. Seat and back plate: all are made of engineering plastics (imported PP material), with high strength, aging resistance and durability. Designed based on ergonomics principles and incorporating the concept of back protection, it ensures fatigue free sitting for extended periods of time.2. Column: 70x30x1.2mm high-quality elliptical steel, rust resistant and durable. The foot specification is 300x80x30mm, made of high-quality cold-rolled steel plate with a thickness of ≥ 2.0mm and formed by stamping and stretching.3. Desktop: 18mm thick medium density fiberboard substrate, surface coated with fireproof board, duckbill edge wrapping, desktop width of 350mm, high bonding strength, beautiful and generous, durable, desktop wear-resistant, scratch resistant, easy to clean.4. Front desk panel: 15mm thick high-quality medium fiber decorative panel, with PVC edges on all four sides.5. Lower shelf: 20x1.2mm square tube bent and welded to round tube to form.6. Rebound and braking mechanism: Adopting a self weight return device, it has the advantages of good return, low failure rate, and durability. The rotary shaft sleeve is made of nylon sleeve, which returns silently. The brake parts are made of 1.5mm cold-rolled steel plate and stamped in one go to form a "concave" shape. The rotating shaft is made of round steel with a diameter of 12mm, and the inner end is machined into a 10mm diameter axis by a lathe, with left and right limit functions; The seat support ear iron is made of hot-rolled steel stamping with a thickness greater than 2mm, with a smooth and beautiful surface that does not require polishing treatment. The rear counterweight pull rod is made of 20x1.2 square tube;7. Welding: CO2 shielded welding is used, with deep solder joints without bottom seams, smooth and even welds, good load-bearing capacity, and strong durability.8. Hardware: All products comply with national standards to ensure secure connections and long service life.9. The surface of the steel parts undergoes multiple degreasing, acid washing, neutralization, surface adjustment, film coating, crystallization, and electrostatic spraying. The surface is smooth and even, with even spraying. There will never be any peeling of the paint surface.

1. Standing foot: Made of high-quality aluminum alloy integrated die-casting, with armrest bracket, specification 910x440x45 (mm), thickness greater than 4mm, strong load-bearing capacity, stable connection, rust resistance, and durability.2. Backboard: Made of steel or aluminum alloy (choose 1 from 2) frame, the panel is E1 grade multi-layer laminated fireproof board, which is formed by high-temperature and high-pressure drying with molds, has high strength and is not easy to break. It is double-sided pasted with high-quality fireproof board with a thickness of 0.8mm, and the surface is scratch resistant and wear-resistant, with a thickness of 9mm.3. Seat board: E1 grade multi-layer board is used, which is formed by high-temperature and high-pressure drying with a mold. It has high strength and is not easy to break. High quality fireproof board is pasted on both sides, and the surface is scratch resistant and wear-resistant. The edges are sealed with environmentally friendly paint, with a thickness of 15mm.4. Desktop: Made of 18mm thick medium density fiberboard substrate, with 0.8mm fireproof board pasted on the surface, semi-circular edge wrapped near the human end, and 1.0mm PVC straight edge sealed on the other 3 sides. The desktop is 300mm deep, with high bonding strength, wear resistance, scratch resistance, easy cleaning, and durability.5. Table bucket: ￠ 5+￠ 3mm round steel bent and welded into shape, hollow design, no dirt or grime.6. Rebound device: die cast aluminum alloy seat plate connector, buffering automatic gravity recovery mechanism, with the advantages of good return, low failure rate, never failure, and low noise.7. Welding: CO2 shielded welding is used, with deep solder joints without bottom seams, smooth and even welds, good load-bearing capacity, and strong durability.8. Hardware: All products comply with national standards to ensure secure connections and long service life.9. Surface treatment of steel parts: multiple degreasing acid washing neutralization surface adjustment film coating crystallization electrostatic spraying. The surface is smooth and even, with even spraying. There will never be any peeling of the paint surface.

Standing: Made of high-quality aluminum alloy.Seat and back panel: Made of high-quality birch veneer and hot pressed into shape through molds.Writing desk: Made of high-quality fireproof board with cold pressed surface of medium fiber board.Shuwang: Made of 4mm powder drawn iron and molded.Reply function: Gravity reply.Ground burst screw: expansion nut+screw.

Standing: Made of high-quality aluminum alloy.Seat and back panel: PU material+multi-layer plywood+steel plate.Writing desk: High quality high-density board surface with fireproof board.Shuwang: Made of high-quality cold drawn steel with a diameter of 3mm * 5mm.Reply function: Gravity reply.Ground burst screw: expansion nut+screw.